Our measurement technology in the field
DFM flow meters and DUT-E fuel level sensors at work in ports, fleets, construction sites and power plants worldwide.
DFM flow meters on every engine cut consumption by nearly 60% in the first two weeks.
2,200 DUT-E 2Bio differential sensors halved drain volumes and slashed cargo-insurance costs.
A single DUT-E GSM unit with built-in GPS optimised delivery routes and cut fuel costs by 45%.
DUT-E 2Bio sensors and CANUp gateways stopped underfilling and guaranteed uninterrupted power.
DFM CAN flow meters with S6 Technology revealed real consumption at half the documented norm.
DFM D flow meters on tractors and cotton harvesters stopped fuel theft and cut fuel costs by 30%.
DFM flow meters on the track machines cut fuel consumption by 20% in four months and lifted performance by 10%.
Battery-powered DUT-E S7 sensors and route monitoring ended fuel theft and detours — fuel costs down 25–30%.
Factory-configured 960 mm DUT-E AF sensors replaced float sensors that couldn’t read a tall, narrow tank — at about 40% lower cost.
DUT-E sensors on 150 lighting masts let dispatch refuel only when needed — fuel and service overheads down 20%.
Battery-powered DFM counters on MTZ and John Deere tractors delivered 20–30% fuel economy and paid back in two months.
The DUT-E ATS station cut tank calibration from 90 to 30 minutes — complete installations now take half the time.
Wireless DUT-E 2Bio S7 sensors replaced dipsticks and logbooks with live level, volume and temperature in every tank.
Fuel, engine-hour and battery data from Genie lifts cut operating costs by 10% and laid the base for predictive maintenance.
A CANUp gateway and MasterCAN DAC15 let the lessor immobilise trucks by SMS — only after they’ve stood still for five minutes.
High-capacity DFM Marine flow meters on haul trucks and excavators deliver live fuel-per-ton data for the quarry’s efficiency model.
A DFM D S7 flow meter and NMEA 2000 converter put live fuel consumption on a Raymarine display — installed by the owner.
MasterCAN converters and contactless readers delivered CAN/J1708 fuel data to trackers on VDL and Volvo buses for an eco-driving programme.
A DFM 500D flow meter replaced quota accounting on a Lamborghini R8-265 — real consumption came in below quota and drains stopped.
Measured consumption and drain alerts on CAT backup gensets stopped fuel drains and cut fuel costs by 23%.
Level sensors in four tanks and flow meters on four Cummins gensets eliminated drains and cut fuel costs by 16%.
DFM flow meters on 40 off-grid GSM-site generators stopped drains and cut fuel consumption by 15%.
DFM 500D flow meters on 810 kVA CAT generators gave remote control of fuel and runtime — fuel savings of up to 30%.
A MasterCAN RS2CAN converter and CANUp gateway put DSE controller data from 230–330 kVA gensets into the provider’s own telematics service.
DFM and DUT-E sensors over Modbus let SCADA refuel genset day tanks automatically — fuel costs down 15%.
Wireless DFM flow meters and NMEA 2000 converters replaced estimates with measured fuel use — the basis for fuel norms per trawling mode.
Battery-powered DUT-E and DFM sensors with a solar gateway fully automated fuel accounting on mobile well-testing units.
An 8-metre DUT-E sensor and DFM flow meters on fill and dispense lines replaced dipsticks with measured fuel in, out and in stock.
Flow and level data on 300 kW diesel water pumps stopped theft and caught a 15% consumption jump caused by clogged filters.
DFM flow meters on 21 tractors cut fuel costs by 35% and field transit time by 70%.
DUT-E and DFM sensors plus a MasterCAN converter put generator fuel and engine data on the standard RS-485 panel — now fitted in production.
DUT-E GSM sensors eliminated theft and paid for the whole installation in under three weeks.
Have a similar challenge?
Tell us about your fleet or site and we'll recommend a measurement setup that fits.